DOUBLE WELT CORD FOOT HV GRP 1-8

The Double Welt Cord Foot is used to make trim, to cover raw 
edges in place of braid or trim on your upholstery and home dec 
projects, or as a decorative touch on pillows, cushions and other 
home accessories. Create any color of trim when the color you 
need is not readily available.
1. Purchase ¼" (6 mm) Cotton Filler Cord at least two times the length of the finished 
length of double welt trim.
2. Cut bias strip wide enough to wrap around two cords plus seam allowance.
3. Snap on the Double Welt Cord Foot. Select center needle straight stitch, stitch length 3.0. 
Place the cords side by side on the wrong side of the bias strip and wrap the fabric 
around the cords. Place the fabric and cords under the Double Welt Cord Foot with raw 
edges of the fabric to the right. Place the right cord in the left groove on the underside 
of the foot. Keep the cords against the fold as you sew.
4. Wrap the excess fabric to the underside and straight stitch between the cords through all 
layers. Trim the excess fabric on the wrong side near the stitching.
5. To sew the double welt cord trim to fabric, lay it in place on the project and straight stitch 
over the row of stitching in step 4.
6. For the edges of upholstery, use small upholstery finishing tacks or a staple gun to 
attach the double welt cord trim to cover raw edges

Product Number 412627145

Fits 1,2,3,4,5,6,7,8

Not for Onyx series

Get in touch with us if you are unsure which foot your machine takes, we can help!